The Elecbrake EB2 brake controller is a trailer mounted proportional brake controller. The device can be used with the Plug and Play adaptors or hardwired to the trailers electrical circuits with a Leader. The device is fitted with an IP68 connector. Allows compliance with ADR38/05.
Note: This is just the Elecbrakes EB2 unit itself, without the installation adaptor or the remote control.
Which Elecbrakes adaptor should I purchase and install with my EB2?
You must choose the appropriate Elecbrakes Adaptor based on your Tow vehicles’ trailer wiring socket and Trailer plug. The differences are in the shape and pin count.
Start by confirming the socket type fitted to the rear of the tow vehicle, then selecting the trailer plug type.
Elecbrakes provide an adaptor for each combination of commonly available plug and socket, allowing you to connect your vehicle to your new trailer, or vice versa, potentially without changing the plug or socket on your vehicle or trailer. When towing with multiple vehicles, it may be necessary to have more than 1 adaptor type on hand for installation to suit different combinations.
Some combinations will allow cross use, for example:
- Vehicles equipped with a 12 pin flat socket can accept a 12 pin flat or a 7 pin flat adaptor/trailer plug. However, vehicles equipped with a 7 pin flat socket will not accept a 12 pin adaptor/trailer plug.
